HCL/Network Adapters (Wireless)

From openSUSE

Eğer, bir donanıma ait parça, şu anki programın sürümünden önceki bir sürümde çalışıyorsa, bu donanımın, en yeni sürümde de çalışması büyük bir şanstır. Yine de, hiçbir zaman, şu anki sürümün, bir şekilde, donanımın yapılandırmasını veya sürücüyü bozmayacağının garantisi yoktur. (örnek olarak Bug 168618). Aşağıdaki tabloda bulunan en son sürüm için (q) nun yenilemesini yapmadan önce donanımınızın şu anki sürümü çalıştırmaya yeterli olup olmadığını lütfen kontrol edin.

Chipsets

Chipset	Type	Bus	Driver	SL 9.3	SL 10.0	SL 10.1	SLES/NLD 9	Comments
ADMtek 8211	802.11b	PCI/Cardbus	adm8211
Aironet 4500/4800	802.11b	PCI/PCMCIA	aironet
Atheros 5005G	802.11bg	PCI/Cardbus	madwifi					Ana nongpl paketi gerekmektedir. SL 10.1: Here is a workaround using ndiswrapper or madwifi.
Atheros 5005G	802.11a	PCI/Cardbus	madwifi					Ana nongpl paketi gerekmektedir. SL 10.1: Here is a workaround using ndiswrapper or madwifi.
Atheros 5210	802.11a	PCI/Cardbus	madwifi					(SLES/NLD 9 - i386 only) nongpl paketi gerekmektedir. SL 10.1: Here is a workaround using ndiswrapper or madwifi.
Atheros 5211	802.11ab	PCI/Cardbus	madwifi					(SLES/NLD 9 - i386 only) Ana nongpl paketi gerekmektedir. SL 10.1: Here is a workaround using ndiswrapper or madwifi.
Atheros 5212	802.11abg	PCI/Cardbus	madwifi					(SLES/NLD 9 - i386 only) Ana nongpl paketi gerekmektedir. SL 10.1: Here is a workaround using ndiswrapper or madwifi.
Atmel at76c05x	802.11b	PCMCIA/USB	atmelwlandriver
Broadcom			-					ndiswrapper ile çalışır.(64bit sürücüler de ndiswrapper ile çalışabilirler)
Intel PRO/Wireless 2100	802.11b	PCI	ipw2100
Intel PRO/Wireless 2200BG	802.11bg	PCI	ipw2200					SuSE 10.0'da , 802.11b yönlendiricileriyel bağlantıyı sağlayan aygıtın kullanılmasında bir problem olabilir. olası çözümBuradadır SuSE 10.1'da, the ipw-firmware package from the Non-OSS add-on CD is required.
Intel PRO/Wireless 2915ABG	802.11abg	PCI	ipw2200					SuSE 10.1' need to use the Extras CD disk 6. May need to use Traditional ifup instead of Network Manager
Intel PRO/Wireless 3945ABG	802.11abg	PCI-e	ipw3945					On SuSE 10.1 need to use the Extras non-oss CD disk 6. Use the wlan kernel & install the firmware upgrade.
Marvel			-
Orinoco	802.11b	PCI/PCMCIA	orinoco
Orinoco	802.11b	USB	-
Prism2/2.5/3	802.11b	PCI/PCMCIA	hostap					chipset is supported by three drivers hostap, linux-wlan-ng, and orinoco (SLES/NLD 9 uses linux-wlan-ng driver by default)
Prism2/2.5/3	802.11b	USB	linux-wlan-ng
PrismGT/ Duette	802.11bg	PCI	prism54					In 10.1 you need to download firmware, see PCI devices below. In 9.3, 10.0 you could obtain it via YAST.
Ralink RT2400	802.11b	PCI/Cardbus	rt2400
Ralink RT2500	802.11g	PCI/Cardbus	rt2500					current stable driver does not work with SMP kernel, new driver with SMP support currently being developed. Try this HowTo!
Ralink RT2570	802.11g	USB	rt2570					(Random user: I couldn't make this one work by the default suse installation, v10.0 or 10.1; but this project (1) (2) is a possible solution.)
Realtek 8180	802.11b	PCI/Cardbus	rtl8180-sa2400
Texas Instruments ACX100	802.11b+	PCI/Cardbus	acx					proprietary protocol (22 Mbps)
Texas Instruments ACX111	802.11g	PCI/Cardbus	acx					very buggy driver (currently alpha), packet loss, connection loss, Linux-unfriendly vendor
ZyDAS ZD1201	802.11b	USB	zd1201
ZyDAS ZD1211	802.11g	USB	zd1211					An opensource driver (V2.0.0) for kernel 2.4/2.6 can be found at the Zydas-Homepage. In addition, there's an OpenSource fork actively maintained, available at [1].

Chipsets missing or listed here as not supported may work using ndiswrapper.

Atheros chipsets can be used via the Atheros madwifi driver.

help with ndiswrapper here [2]

You can find an extensive list of wireless LAN cards including the chipset information here [3].

Cards

PCMCIA

Make	Model	Chipset/ Driver	Supports Network Install	Supported in installed system	9.3	10.0	10.1	Comments
ARtem	Onair ComCard 11	orinoco_cs
Belkin	F5D7010	RT2500						only non-SMP kernel (see information above about RT2500 chipset)
Cisco	Aironet 340	aironet
Conceptronics	54 Mbit/s WLAN PCMCIA	RT2500						only non-SMP kernel (see information above about RT2500 chipset)
D-Link	DWL-650	Prism II
E-Tech	WGPC03	RT2500						only non-SMP kernel (see information above about RT2500 chipset)
Level1	WPC-0300	AR5212
Linksys	WPG54g	Broadcom BCM4306						ndiswrapper
Lucent	Orinoco	Hermes
Netgear	WG511 v2.0	Prism Duett or Marvell	after online-update, ndiswrapper	, ndiswrapper+W2000 driver				Prism: Doesn't work on SuSe 10 rc1 works with workaround: add "PREFER_WPA_SUPPLICANT='no' to the ifcfg-wlan, Marvell: Works sometimes not on SuSE 9.3 (Reason not known, reconnect helps mostly)
Netgear	WG511 v3.0			only by ndiswrapper
Philips	CPWNA100	AR5212	madwifi
Sitecom	WL-011 v1	atmel						download the firmware from the SuSe 10.0 Evaluation repository or use yast with extra repository
TRENDnet	TEW-221PC	ADM8211

USB

Make	Model	Chipset/ Driver	Supports Network Install	Supported in installed system	9.3	10.0	10.1	Comments
D-Link	DWL-G122	RT 2500						(does not work on SMP kernels!)
D-Link	DWL-122	Prism 2/2.5/3
Edimax	7317U	Zydas zd1211						supports USB2.0 and works immediately after compile with make
LinkSyS	WUSB54G							In 9.3 only with the Serial Monkey Driver. Had to edit the config-file of the wireless-card; The USB-Adapter has to be configured in YAST as ethernet-device. In addition to this file You need a file named ifcfg-rausb0 (text-file)in the directory /etc/sysconfig/network.
Longshine	8131G2	Zydas zd1211						supports USB2.0 and works immediately after compile with make
Microsoft	MN-510							in 10.1 final it is seen when you run tail -f /var/log/messages but yast will not see it
Netgear	WG121	Prism GT						Will NOT work with x86_64 SUSE, 32 bit drivers do not work with 64 bit OS, no plans by Netgear to ever provide 64 bit drivers, Windows or Linux.

PCI

Make	Model	Chipset/ Driver	Supports Network Install	Supported in installed system	SUSE Linux Release	Arch.	Comments
Airlink	AWLH3025	ACX111/acx_pci			10.0 OSS	x86	First you need to install firmware using YOU and selecting installacx111firmware.sh, then you can configure directly with YaST
Conceptronics	54 Mbit/s WLAN PCI	RT2500			9.3 + 10.0	x86, x86_64, non-SMP only	only non-SMP kernel (see information above about RT2500 chipset)
D-Link	DWL-520+	unknown/YAST2			10.0 RC1		Card is recognised, yet unable to start WiFi, still on the lookout
D-Link	DWL-510	r8180			10.0 32/64-bit, 10.1 32-bit	x86_64	kernel driver included as standard, does not show in Yast but is picked up on a fresh install. Drivers provided by vendor are for 32-bit only. ndiswrapper can not load 32-bit drivers on 64-bit OS.
D-Link	DWL-G520 version b	Atheros/ath_pci			10.0 OSS	x86_64	Version b cards that use the Atheros chips works out of the box, no driver installation required. Card recognized, just needed to configure the network interface with Yast and it worked instantly.
D-Link	DWL-G520 version C	Atheros/ath_pci			10.1 OSS	x86	Version C cards are not recognised. Nidswrapper locks up.
Intersil	ISL3890	PrismGT/Duette			10.1 OSS	x86	You need to download the firmware, version 1.0.4.3, for the ISL3890 from the following URL http://prism54.org/fullmac.html and saved the firmware file as isl3890 (no Capitals) in the /lib/firmware/ directory. I used in KDE KMenu/System/FileManager/ FileManager-SuperUserMode to download/save the firmware.
Netgear	WG 311 TGR	AR52xx/madwifi			10.0 OSS	i386	After installing the NON-GPL kernel, card works out of the box. Yast2 uses module ath_pci.

External Links

Novell SUSE Linux - Hardware Compatibility List

Novell SUSE Linux Certified Hardware

• Wireless LAN card list